Industrial Large Inspection Stamp - Impression Size: 5/8" Diameter
Make clear, permanent inspection marks on a wide variety of surfaces with the Xstamper Pre-Inked Industrial Large Inspection Stamp. Designed for manufacturing, quality control, inspection, warehouse, and industrial applications, its proprietary industrial ink is fast-drying, permanent, and water-resistant when fully cured. The specially designed cap helps prevent the ink from drying out, making this stamp a reliable choice for slick, non-porous, and other hard-to-mark surfaces.
*Average drying time for F-Series stamps is approximately 90-120 seconds. Actual drying time may vary depending on atmospheric conditions and the surface being stamped.
Must use Xstamper Industrial Refill Ink only.
Re-Inking Instructions
1. Remove the cap and place it face down.
2. Hold the stamp handle firmly and pull the die holder out of the handle.
3. Place the die holder on top of the removed cap with the impression die facing down. Hold the die firmly and remove the top plug.
4. Apply 5 drops of Xstamper Industrial Refill Ink into the F16 opening.
Recommendations
For best results, re-ink your stamp overnight to allow the ink to fully absorb before use.
Works on the Following Surfaces with Results
A.B.S (Excellent)
Acrylic Board (Excellent)
Aluminum (Excellent)
Brass (Excellent)
Cellophane (Excellent)
Ceramic (Good)
Cotton Cloth (Excellent)
General Painted Surfaces (Excellent)
Glass (Good)
Hard & Soft P.V.C. (Good)
Leather (Good)
Melamine Coated Board (Good)
Plywood (Good)
Polyester Film (Excellent)
Art Paper (Excellent)
Coated Paper (Good)
Construction Paper (Excellent)
Corrugated Paper (Excellent)
Hard & Regular Tracing Paper (Good)
Letter Paper (Good)
Photographic Paper (Excellent)
Polyethylene Film (Fair)
Polypropylene (Good)
Rubber (Fair)
Stainless Steel (Excellent)
Styrofoam (Good)
Synthetic Fabric (Good)
"Satisfaction Guaranteed"
Returns and exchanges of stock merchandise require prior authorization. Contact us in advance with your order number, the items to return, and the reason. Approval is required before anything is sent back.
- Credit or exchange is available within 60 days of the original shipment date.
- Merchandise must be unused, unopened, and in good, resalable condition.
- A 15% restocking fee applies to all returned merchandise.
- Return shipping costs are the customer's responsibility.
- Custom-made products are non-returnable, except when the order was damaged or lost in transit, or we made a customization or spelling error.
Questions about a return? Email info@ShachihataUSA.com or call (800) 541-9719 x. 1.
What Our Customers Say
