Industrial Round Stamp - Impression Size: 1/4" Diameter
Make a lasting mark on a wide variety of challenging surfaces with Xstamper pre-inked industrial stamps. Our proprietary ink formulation is fast-drying, permanent, and water-resistant once fully cured. Specially designed caps help prevent the ink from drying out between uses. These industrial stamps are ideal for marking slick, hard-to-mark, and non-porous surfaces.
Average drying time for F-Series stamps is approximately 90-120 seconds, but drying time may vary depending on atmospheric conditions and the surface being stamped.
Use Xstamper Industrial Refill Ink only.
Re-Inking Instructions
1. Remove the cap and place it face down.
2. Hold the stamp handle firmly and pull the die holder out of the handle.
3. Place the die holder on top of the removed cap with the impression die facing down. Hold the die firmly and remove the top plug.
4. Place one drop of Industrial Refill Ink into the F06 opening.
Recommendations
For best results, re-ink your stamp overnight to allow the ink to fully absorb before use.
Works on the Following Surfaces
A.B.S (Excellent)
Acrylic Board (Excellent)
Aluminum (Excellent)
Brass (Excellent)
Cellophane (Excellent)
Ceramic (Good)
Cotton Cloth (Excellent)
General Painted Surfaces (Excellent)
Glass (Good)
Hard & Soft P.V.C. (Good)
Leather (Good)
Melamine Coated Board (Good)
Plywood (Good)
Polyester Film (Excellent)
Art Paper (Excellent)
Coated Paper (Good)
Construction Paper (Excellent)
Corrugated Paper (Excellent)
Hard & Regular Tracing Paper (Good)
Letter Paper (Good)
Photographic Paper (Excellent)
Polyethylene Film (Fair)
Polypropylene (Good)
Rubber (Fair)
Stainless Steel (Excellent)
Styrofoam (Good)
Synthetic Fabric (Good)
"Satisfaction Guaranteed"
Returns and exchanges of stock merchandise require prior authorization. Contact us in advance with your order number, the items to return, and the reason. Approval is required before anything is sent back.
- Credit or exchange is available within 60 days of the original shipment date.
- Merchandise must be unused, unopened, and in good, resalable condition.
- A 15% restocking fee applies to all returned merchandise.
- Return shipping costs are the customer's responsibility.
- Custom-made products are non-returnable, except when the order was damaged or lost in transit, or we made a customization or spelling error.
Questions about a return? Email info@ShachihataUSA.com or call (800) 541-9719 x. 1.
What Our Customers Say
